MFC ONE7 RACING EZ PACK

MFC One7 Hydrofoil Racing EZ Pack is our Hybrid (Aluminum Mast + Carbon Composites Parts) windsurfing hydrofoil. Fuselage and wings are built in Carbon Composites Construction and RTM technology using Sicomin G33 BioEpoxy resin and assembled with our Aluminum Mast 85cm. This hydrofoil starts flying with only 8knots of wind. It allows you to interchange parts and pieces to make your own setup and build your own quiver.


MFC One7 RACING EZ PACK includes:
> AluMast 85cm
> Carbon Fuselage 92cm
> Racing FrontWing 78cm
> Racing BackWing 38cm
> 2 Shims (1H & 2H)
> Travel Case


Available Box:
> Foil  Box Only
It is strictly recommended to use a board that is “Foil Ready”


SPEED
100%

MANEUVERABILITY
85%

CONTROL
95%

POWER
90%

MFC One7 RACING EZ PACK includes:
> AluMast 85cm
> Carbon Fuselage 92cm
> Racing FrontWing 78cm
> Racing BackWing 38cm
> 2 Shims (1H & 2H)
> Travel Case


ONE7 – ALUMINIUM MAST
MFC One7 Hydrofoil Aluminium mast is 94cm


Racing Front Wing 78cm
MFC One7 Hydrofoil Carbon Racing Front Wings are the ones designed and developed for high performance racing conditions. Built in Carbon Composites technology, and using a very efficient profile, these wings will allow you to reach high speed with the lightest wind. We made sure the wings have a limited flexibility to allow you to push your board to the highest speed possible. Light Wind performance, stability and high-speed are the major characteristics of this set.


Racing Back Wing 38cm
MFC One7 Hydrofoil Carbon Racing Back Wing or Stabilizer, is designed and developed for high performance racing condition. Built in Carbon Composites technology, and using an efficient and compatible profile, it will allow you to reach high speed in total control. With our technology we made sure the wing is rigid enough to push your board to the highest speed possible. Light Wind performance, stability and high-speed are the major characteristics of this set.


ONE7 Fuselage 92cm
MFC One7 Hydrofoil Fuselage is built in Carbon Composites technology and available in two options. You can build your own ONE7 Racing or Freeride according to your favorite conditions. Full carbon construction


ONE7 SHIMS
MFC HYDROFOIL ONE7  SHIMS are made to change the angle of attack (AOA) of front and back wings. We developed 1 shim for the Front wing and 2 shims for the back wing. The AOA of the wings is the key to your performance. Especially at the beginning if you feel you need a little more help to fly, you can use the <2H> on the back wing. This will push your hydrofoil to a major lift. You will obviously loose a bit on top speed. The Hydrofoil is a very technical Carbon part and we want to give you as many tips as possible to make your experience “unforgettable”

Available Shims:
> BackWing Shim 1H
> BackWing Shim 2H