MFC HYDROS | 2xFW Pack

$2,750.00


The HYDROS 2XFW Pack gives you the perfect setup of two front wings, covering most of your surfing foil needs. The front wing FW1250 is great for surfers over 180lbs or surfers looking to foil in smaller, less powerful waves, as well as for beginners. The front wing FW1075 wing is designed for surfers under 180lbs or medium to larger size waves where speed is more important than lift.


  • Premium Travel Bag
  • FW1250 wing
  • FW1075 wing
  • BW225
  • Fuselage 63
  • Mast70
  • Shims
  • Hardware

 

In stock

SKU: MFOIL124 Category:

MFC HYDROSMFC HYDROS

HYDROS 2xFW PACK | PARTS:


MAST C70: The profile allows control, speed and no drag at all. Not much lift is generated by the mast itself, everything is concentrated on the wings. Our technology allowed the mast to reach maximum stiness and no torsion for speed, control, carving. The attachment to the board is a full Carbon/Epoxy molded plate with plate recess of 2mm to allow the mast to fit in perfectly. RTM Technology built with Carbon/Epoxy G33 Bio Resin. Length of 70cm. — Weight || 1.20Kg


FUSELAGE: Built in the same Carbon/Epoxy technology; FW and Mast attachment are conic to allow a perfect and precise fitting. It comes in a length of 63cm. —Weight || 500gr


FRONT WINGS: Our Front Wing generates a lot of gradual lift and they are very easy to control. Built with our Mold Technology with Carbon Twill, PVC core and G33 Bio Resin, it is one of the most advanced wings on the market. It reaches an excellent top speed allowing continuous turns with not much effort, keeping gliding. It’s V shapes allows easier turns keeping speed and gliding with low effort.


> FW 1075: Wingspan 65.3cm | For surfers up to 180lb. — Weight || 1kg
> FW 1250: Wingspan 72cm | For surfers from 180lb and up. Also for very small waves. Built in Carbon/PCS/Epoxy technology, and designed with one of the thinnest profiles. — Weight || 1.10kg


BACK WING | BW 225: Built in Full Carbon — Weight || 180gr


SHIMS: Hydros is delivered with three shims, Zero, One.Five & Two.Five. Shims are needed to adjust and control the Angle Of Attack (AOA) of the back wing. Shims help dictate the amount of lift we will achieve from the back wing. The bigger the AOA the most Lift we will have, the smaller the AOA the most speed you will achieve. These should be chosen in relation to the size of the front wing that is being used.


SPEED
95%

MANEUVERABILITY
99%

CONTROL
99%

POWER
95%